GP130 is a general purpose polystyrene (GPPS) with high stiffness and high transparency. It is designed for injection molding processing such as appliance & electronic parts (refrigerator food tray).
INDUSTRY
-Appliance & Electronic Parts
-Housewares
PRODUCT FEATURE
-High Stiffness
-High Transparency
REGULATION COMPLIANCE
-FDA US 21 CFR 177.1520
-Commission Regulation(EU) No. 10/2011
-RoHS Directive 2011/65/EU
-REACH Regulation (EC) No. 1907/2006
-UL Yellow Card: E132283
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityHigh TransparencyFood Contact | |||
| Applications | Electronics & Electrical ApplicationsHousewaresFood TraysInternal Refrigerator Parts | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | Injection | |||
| Compliance | EU 2011/10/ECFDAREACH (EC 1907/2006)RoHSUL QMFZ2 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23°C |
Melt Mass Flow Rate(MFR) | |||
200 ℃/5 Kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** kg/cm² | ASTM D638 | 3.2 mm, 1 mm/min |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | 3.2 mm, 5 mm/min |
Break | *** kg/cm² | ASTM D638 | 3.2 mm, 5 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 3.2 mm, 5 mm/min |
Flexural Modulus | *** kg/cm² | ASTM D790 | E-Modulus, 3.2 mm, 1.3 mm/min |
Flexural Strength | |||
- | *** kg/cm² | ASTM D790 | 3.2 mm, 1 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | 3.2 mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | 3.2 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | 3.2 mm, Annealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | 3.2 mm, 1 kg, 50 °C/h |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
