2563PCXTA6 is a PP Block co-polymer with 30% Talcum filler for injection molding process, features high melt flow, high flexural modulus and high heat resistance with UV Stabilizer. It is suitable for auto parts and electrical appliances.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceUV StabiltiyHigh FlowFilled & Reinforced | |||
| Additive | UV-Stabilizer | |||
| Applications | Electronics & Electrical ApplicationsAutomotive Parts | |||
| Processing | Injection | |||
| Reinforced | 30% Talc | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | 23°C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** kg/cm² | ASTM D790 | 23°C |
Flexural Strength | |||
Yield | *** kg/cm² | ASTM D790 | 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** Kg·cm/cm² | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | 23°C |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
