* Desciription PA66 GF 15% reinforced * Caracteristics Rigidity, Mechanical strength, Heat resistance, Glycol resistance * Application Automobile : Underhood parts, Interior/Exterior parts Electric/Electronics : Coil bobbin, Electronic tools etc Othres : Furniture, Construction etc
| Original Document | Technical Datasheet(Chinese&English) Technical Datasheet-ASTM(Chinese&English) | |||
| Features | High Stiffness/RigidityHeat ResistanceGlycol resistanceFilled & Reinforced | |||
| Reinforced | 15% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
Flow | ***~*** % | ASTM D955 | |
Flow | ***~*** % | ISO 294-4 | 3T |
Across Flow | ***~*** % | ASTM D955 | |
Across Flow | ***~*** % | ISO 294-4 | 3T |
Water Absorption | *** % | ASTM D570 | |
Water Absorption | *** % | ISO 62 | 23°C, Water 24h |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | |
Tensile Modulus | *** Mpa | ASTM D638 | RH50 |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | 23°C |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | 23°C,RH50 |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
- | *** Mpa | ASTM D 638 | RH50 |
- | *** Mpa | ISO 527-1/-2 | 23°C |
- | *** Mpa | ISO 527-1/-2 | 23°C,RH50 |
Tensile Elongation | |||
- | *** % | ASTM D 638 | |
- | *** % | ASTM D 638 | RH50 |
- | *** % | ISO 527-1/-2 | 23°C |
- | *** % | ISO 527-1/-2 | 23°C,RH50 |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Modulus | *** Mpa | ASTM D790 | RH50 |
Flexural Modulus | *** Mpa | ISO 178 | 23°C |
Flexural Modulus | *** Mpa | ISO 178 | 23°C,RH50 |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | |
- | *** Mpa | ASTM D790 | RH50 |
- | *** Mpa | ISO 178 | 23°C |
- | *** Mpa | ISO 178 | 23°C,RH50 |
Poisson Ratio | *** - | ASTM D 638 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | RH50 |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | RH50 |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ASTM D256 | |
23℃ (73℉) | *** kJ/m² | ASTM D256 | RH50 |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
Rockwell R | *** R | ASTM D785 | RH50 |
Rockwell R | *** R | ISO 2039-2 | |
Rockwell R | *** R | ISO 2039-2 | RH50 |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | |
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | Flatwise |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | Flatwise |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/K | ASTM D 696 | |
- | *** E-6/K | ISO 11359-1/-2 | |
Melt Temperature(Tm) | *** °C | Internal | DSC |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Volume Resistivity | *** Ohm-cm | IEC 60093 | |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | IEC 60250 | |
1MHz | *** - | ASTM D 150 | |
Dissipation Factor | |||
1MHz | *** E-4 | IEC 60250 | |
1MHz | *** E-4 | ASTM D150 | |
Dielectric Strength | *** kV/mm | ASTM D149 | |
Dielectric Strength | *** kV/mm | IEC 60243-1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
