NBC03HRA is a Polypropylene (PP) type H NEWCON thermoplastic olefin (TPO). It is a PP which has high rubber and high melt flow index for using in injection molding process or. The features are excellent cold impact, heat resistance, and good fluidity.
Typical applications;
Injection molding: Interior & exterior parts for automobile, polymer base for polymer compounding
| Original Document | Technical Datasheet(English) | |||
| Features | High Impact at Low TemperaturHeat ResistanceHigh Flow | |||
| Applications | Automotive Interior TrimsAutomotive Exterior Trims | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1 | |
Flexural Modulus | *** Mpa | ISO 178 | 1% SECANT |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
