2300K is a Polypropylene Impact Copolymer (ICPP) with the characteristic of high impact strength and stiffness balance. It is designed for injection molding processing such as appliance & electronic parts, household, container and pails.
INDUSTRY
-Appliance & Electronic Parts
-Household & Houseware Parts
-Containers and Pails
PRODUCT FEATURE
-High Impact Strength
-Good Stiffness
REGULATION COMPLIANCE
-FDA US 21 CFR 177.1520
-Commission Regulation(EU) No. 10/2011
-RoHS Directive 2011/65/EU
-REACH Regulation (EC) No. 1907/2006
-UL Yellow Card: E132283
-Halal Certificate
| Original Document | Technical Datasheet(English) | |||
| Features | High StrengthHigh ImpactFood Contact | |||
| Applications | ContainersHousehold ItemsElectronics & Electrical ApplicationsPails | |||
| Processing | Injection | |||
| Compliance | EC 2023/2006EU 2011/10/ECFDAHALALRoHSUL QMFZ2 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23°C |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 3.2 mm, 50 mm/min |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 3.2 mm, 50 mm/min |
Flexural Modulus | *** Mpa | ASTM D790 | 1% Secant, 3.2 mm, 1.3 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
-20℃ (-4℉) | *** J/m | ASTM D256 | 3.2 mm |
23℃ (73℉) | *** J/m | ASTM D256 | 3.2 mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | 3.2 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed, 3.2 mm |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
