B1101 is a Homo-Polypropylene (Homo-PP), with low melt flow index for using in extrusion blow molding and sheet extrusion process. The features are general purpose for vacuum and pressure forming. It’s suitable for bottles, meat & product trays, refrigerator parts, sheet and strapping, and etc.
Typical applications;
Extrusion: bottles, meat & product trays, refrigerator parts, sheet and strapping, etc.
| Original Document | Technical Datasheet(English) | |||
| Features | High ViscosityHomopolymer | |||
| Applications | BottlesSheetsFood TraysRefrigerator applicationsStrapping | |||
| Processing | ExtrusionExtrusion Blow MoldingVacuum Forming | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23°C |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | 1% Secant, 3.2 mm, 1.3 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
