1150H is a Polypropylene Homopolymer with the characteristic of high transparency, high stiffness and high thermal stability. It is designed for extrusion processing such as transparent sheet for thermoforming packaging and extrusion blow molding (Retort Bottle).
INDUSTRY
-Transparent Thermoforming Packaging
-Transparent Drink Cups or Food Tray
-Extrusion Blow Molding (EBM)
-Retort Bottle
PRODUCT FEATURE
-Highest Stiffness
-Transparent Sheet/Bottle
-Improved Appearance with Less Yellowness
-Retortable & Microwaveable*
-Good Processability
-High Production Rate
REGULATION COMPLIANCE
-FDA US 21 CFR 177.1520
-Commission Regulation(EU) No. 10/2011
-RoHS Directive 2011/65/EU
-REACH Regulation (EC) No. 1907/2006
-Halal Certificate
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityHeat StabilizedHigh TransparencyEasy processingFast Cycle TimeFood ContactHomopolymer | |||
| Applications | PackagingCupsSheetsFood TraysRetort Bottle | |||
| Processing | ExtrusionSheet ExtrusionExtrusion Blow MoldingThermoforming | |||
| Compliance | EU 2011/10/ECFDAHALALREACH (EC 1907/2006)RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23°C |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 3.2 mm, 50 mm/min |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 3.2 mm, 50 mm/min |
Flexural Modulus | *** Mpa | ASTM D790 | 1% Secant, 3.2 mm, 1.3 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 3.2 mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | 3.2 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed, 3.2 mm |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 1 mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
