1140H is a Polypropylene Homopolymer with the characteristic of good stiffness and balane impact. It is suitable for various applications like blow molding and sheet extrusion.
TYPICAL APPLICATION
-Super high clarity thermoforming packaging
- Super high clarity extrusion sheet
- Extrusion Blow Molding bottle (EBM)
PRODUCT FEATURES
-Good stiffness with Impact balance
- High deep dawn thermoforming
- Super high clarity
COMPLIANCE
-FDA US 21 CFR 177.1520
-Commission Regulation(EU) No. 10/2011
-RoHS
-REACH
| Original Document | Technical Datasheet(English) | |||
| Features | Good StiffnessGood Impact ResistanceHigh ClarityFood ContactHomopolymer | |||
| Applications | BottlesPackagingSheets | |||
| Processing | ExtrusionSheet ExtrusionExtrusion Blow MoldingThermoforming | |||
| Compliance | EU 2011/10/ECFDAREACH (EC 1907/2006)RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | 1% SECANT |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 1 mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
