1125NA is a Polypropylene Homopolymer resin for CPP film (monolayer and core layer for co-extrusion cast film) containing slip and anti-block additive with the characteristic of good processibility and high clarity.
TYPICAL APPLICATION
-Packaging film
-Film for lamination(As a core layer for co-extrusion cast film, monolayer cast film)
PRODUCT FEATURES
-Good processibility
-High clarity
-Low gels
COMPLIANCE
-FDA US 21 CFR 177.1520
-Commission Regulation(EU) No. 10/2011
-RoHS
-REACH
-HALAL
| Original Document | Technical Datasheet(English) | |||
| Features | High ClarityEasy processingFood ContactHomopolymerLow Gels | |||
| Additive | Slip agentAntiblock | |||
| Applications | FilmPackagingLamination FilmCPP Film | |||
| Processing | Cast FilmExtrusionFilm Extrusion | |||
| Compliance | EU 2011/10/ECFDAHALALREACH (EC 1907/2006)RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | 1% SECANT |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 40 micron film |
Gloss | *** - | ASTM D 2457 | 20°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
