R1760 is a High Density Polyethylene (HDPE) with the characteristic of high impact strength, excellent surface appearance and good rigidity contain UV stabilizer additive. It is designed for injection molding processing such as caps & closures, container, pail and housewares.
INDUSTRY
-Caps and Closures
-Container and Pail
-Housewares
PRODUCT FEATURE
-Weathering performance
-High impact strength
-Good Rigidity
REGULATION COMPLIANCE
-FDA US 21 CFR 177.1520
-Commission Regulation (EU) No. 10/2011
-RoHS Directive 2011/65/EU
-REACH Regulation (EC) No. 1907/2006
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactGood SurfaceFood ContactUV StabiltiyWeather Resistance | |||
| Additive | UV-Stabilizer | |||
| Applications | ContainersCaps/ClosuresHousehold ItemsPails | |||
| Processing | Injection | |||
| Compliance | EU 2011/10/ECFDAREACH (EC 1907/2006)RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23°C |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
190℃/5 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 1 mm, 50 mm/min |
Break | *** Mpa | ASTM D638 | 1 mm, 50 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 1 mm, 50 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | DIN 53453 | 4 mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | DIN 53505 | 4 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | 4 mm, 10 N, 50 °C)/h |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
