320PC is a high chemical high heat grade of acrylonitrile styrene resin for injection molding with natural color and clarity. It is recommended for application where a resistance of chemical and heat are important such as lighter, cosmetic packaging, sanitary ware.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceChemical Resistance | |||
| Applications | Cosmetics PackagingSanitary WareLighter | |||
| Appearance | Pellets/GranulesNatural ColorClear/Transparent | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Melt Mass Flow Rate(MFR) | |||
200 ℃/5 Kg | *** g/10 min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | 23°C |
Flexural Modulus | *** kg/cm² | ASTM D790 | 23°C |
Flexural Strength | |||
Yield | *** kg/cm² | ASTM D790 | 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | 6.35 mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | 6.35 mm, 23°C |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | 6.35 mm |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | 3.18 mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
