SP100(W) is an ABS grade with a UV additive that provides very high impact strength and weathering performance. It is designed for injection molding processing requiring high impact loading while also preventing yellowness such as appliance & electronic parts and automotive parts.
INDUSTRY
-Appliance & Electronic Parts
-Interior Parts
PRODUCT FEATURE
-Super High Impact Strength
-Good Stiffness
-Glossy Finish Parts
-Weathering Performance
REGULATION COMPLIANCE
-RoHS Directive 2011/65/EU
-REACH Regulation (EC) No. 1907/2006
-UL Yellow Card: E132283
| Original Document | Technical Datasheet(English) | |||
| Features | Good StiffnessHigh ImpactHigh GlossUV StabiltiyWeather Resistance | |||
| Additive | UV-Stabilizer | |||
| Applications | Electronics & Electrical ApplicationsAutomotive PartsAutomotive Interior Trims | |||
| Processing | Injection | |||
| Compliance | REACH (EC 1907/2006)RoHSUL QMFZ2 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23°C |
Melt Mass Flow Rate(MFR) | |||
220℃/10 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | 3.2 mm, 5 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 3.2 mm, 5 mm/min |
Flexural Modulus | *** kg/cm² | ASTM D790 | 1% Secant, 6.4 mm |
Flexural Strength | |||
- | *** kg/cm² | ASTM D790 | 6.4 mm, 2.5 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | 6.4 mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | 6.4 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | 6.4 mm, Unannealed |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
