GA850 is a general purpose ABS grade with glossy finish and impact resistance. It is designed for injection molding processing such as appliance & electronic parts, household goods and toys.
INDUSTRY
-Appliance & Electronic Parts
-Housewares
-Sanitary Ware
-Toys
PRODUCT FEATURE
-High Impact Strength
-High Stiffness
-Glossy Finish Parts
REGULATION COMPLIANCE
-FDA US 21 CFR 181.32
-Commission Regulation (EU) 10/2011
-RoHS Directive 2011/65/EU
-REACH Regulation (EC) No. 1907/2006
-UL Yellow Card: E132283
-EN 71-3: Safety of Toys
| Original Document | Technical Datasheet(English) | |||
| Features | High StrengthHigh Stiffness/RigidityHigh GlossFood Contact | |||
| Applications | ToysHousehold ItemsElectronics & Electrical ApplicationsSanitary Ware | |||
| Processing | Injection | |||
| Compliance | EN71EU 2011/10/ECFDAREACH (EC 1907/2006)RoHSUL QMFZ2 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23°C |
Melt Mass Flow Rate(MFR) | |||
220℃/10 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | 3.2 mm, 5 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 3.2 mm, 5 mm/min |
Flexural Modulus | *** kg/cm² | ASTM D790 | 1% Secant, 6.4 mm |
Flexural Strength | |||
- | *** kg/cm² | ASTM D790 | 6.4 mm, 2.5 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | 6.4 mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | 6.4 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | 6.4 mm, Unannealed |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
