SR101 is an ABS grade that provides high impact strength and low melt flow ability. It is designed for extrusion processing sheet thermoforming such as appliance & electronic parts, automotive parts, door liners and luggage bags.
INDUSTRY
-Appliance & Electronic Parts
-Interior Parts
-Door liner
PRODUCT FEATURE
-High Impact Strength
-Low Melt Flow Ability
REGULATION COMPLIANCE
-RoHS Directive 2011/65/EU
-REACH Regulation (EC) No. 1907/2006
-UL Yellow Card: E132283
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactHigh Viscosity | |||
| Applications | LinersElectronics & Electrical ApplicationsLuggage BagsAutomotive Parts | |||
| Processing | ExtrusionSheet ExtrusionThermoforming | |||
| Compliance | REACH (EC 1907/2006)RoHSUL QMFZ2 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23°C |
Melt Mass Flow Rate(MFR) | |||
220℃/10 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | 3.2 mm, 5 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 3.2 mm, 5 mm/min |
Flexural Modulus | *** kg/cm² | ASTM D790 | 1% Secant, 6.4 mm |
Flexural Strength | |||
- | *** kg/cm² | ASTM D790 | 6.4 mm, 2.5 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | 6.4 mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | 6.4 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | 6.4 mm, Unannealed |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
