Polystyrene 830: A high melt flow, high impact polystyrene specially designed for hard to fill injection molding applications. The material is targeted for large parts, thin wall parts, or molds with complex runner and gate systems. The high flow 830 material aids production of stress free parts.
Application:
• Thin wall injection molding
• Textile spools
• Medical applications
• Excellent color concentrate carrier resin
General Information:
• This material complies with FDA requirements as described in 21 CFR §177.1640.
• This material holds Underwriters Laboratory recognition 94HB
• USP Class VI
• Material Safety Data Sheets are available to help customers satisfy their safety needs.
| Original Document | Technical Datasheet(English) | |||
| Features | Food ContactMedical Application/Health CareHigh Flow | |||
| Applications | Thin wall injection moldingCarrier ResinMedical applicationsTextile Spools | |||
| Processing | Injection | |||
| Compliance | FDAUSP Class VI | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Melt Mass Flow Rate(MFR) | |||
200 ℃/5 Kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | ASTM D955 | |
Moisture /Humidity Absorption | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | |
Tensile Strength | |||
- | *** psi | ASTM D 638 | |
Tensile Elongation | |||
- | *** % | ASTM D 638 | |
Flexural Modulus | *** psi | ASTM D790 | |
Flexural Strength | |||
- | *** psi | ASTM D790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** ft·lb/in | ASTM D 256 | |
Falling Dart Impact | *** in-lbs | ASTM D 3029 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
- | *** °F | ASTM D 648 | Annealed |
Vicat Softening Temperature(VST) | *** °F | ASTM D1525 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Gloss | *** - | ASTM D 523 | 60° |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
