This high molecular weight hexene copolymer isdesigned for film applications.It has been formulatedto provide:
-Good processability
-Good toughness and durability
-Good blending characteristics with HDPE HMWfilm resin
Typical applications include:
-Multi - wall liners
-T-shirt & shopping bags
-Trash bags
This resin meets these specifications:
-FDA Regulation 21CFR 177.1520.Suitable forfood packaging.
| Original Document | Technical Datasheet(English) | |||
| Features | Food Contact | |||
| Applications | Compounding/BlendingMulti wall LinersTrash BagsShopping Bags | |||
| Processing | Film ExtrusionCompounding | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
190℃/21.6 kg | *** g/10 min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flexural Modulus | *** Mpa | ASTM D790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD |
Yield | *** Mpa | ASTM D 882 | TD |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD |
Break | *** % | ASTM D 882 | TD |
Elmondorf Tear | *** g | ASTM D 1922 | MD |
Elmondorf Tear | *** g | ASTM D 1922 | TD |
Dart Drop Impact | *** g | ASTM D 1709 | 66cm |
Spencer Impact Strength | *** J | ASTM D3420 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
