Lotrene FD0374 is mainly recommended for the extrusion of very thin film for light duty applications. lt containsboth slip additives (target 600 ppm erucamide) and anti blocking additives (target 900 ppm) as well as antioxidants.
PROPERTIES
Lotrene FD0374 provides excellent clarity, high gloss and low haze films. It also shows excellent processabilityand draw down.
APPLICATIONS
-Film for light duty packaging
-Laundry film
-Display film
-Bakery bags
-Garment & newspaper film
| Original Document | Technical Datasheet(English) | |||
| Features | High GlossFood Contact | |||
| Applications | Heavy duty BagsFilmBags | |||
| Processing | Film Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Friction | *** - | Internal | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Freezing temperature | *** °C | Internal | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 40 µm, Blown Film |
Gloss | *** - | ASTM D 2457 | 45°, 40 µm, Blown Film |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tested Film Thickness | *** μm | Internal | Blown Film |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD |
Yield | *** Mpa | ASTM D 882 | TD |
Break | *** Mpa | ASTM D 882 | MD |
Break | *** Mpa | ASTM D 882 | TD |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD |
Break | *** % | ASTM D 882 | TD |
Elmondorf Tear | *** N/mm | ASTM D 1922 | MD |
Elmondorf Tear | *** N/mm | ASTM D 1922 | TD |
Dart Drop Impact | *** g | ASTM D 1709 | F50 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
