Lotrene FB3003 is an additive free grade, produced by an autoclave high pressure process, mainly recommendedfor heavy duty film applications.
PROPERTIES
Lotrene FB3003 has a molecular structure allowing to produce films with excellent mechanical properties, outstanding shrink properties and excellent bubble stability. Ilt has a high stress cracking resistance. Lotrene FB3003 is mainly recommended for heavy duty film applications.
APPLICATIONS
-Heavy duty bags
-lndustrial shrink film and shrink film for pallets
-Construction film
-Agricultural film
-Drip irrigation pipe
-Small blow molded bottles
| Original Document | Technical Datasheet(English) | |||
| Features | Food Contact | |||
| Applications | Heavy duty BagsFilmShrink FilmDrip irrigation pipe | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Friction | *** - | Internal | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Freezing temperature | *** °C | Internal | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 40 µm, Blown Film |
Gloss | *** - | ASTM D 2457 | 45°, 40 µm, Blown Film |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tested Film Thickness | *** μm | Internal | Blown Film |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD |
Yield | *** Mpa | ASTM D 882 | TD |
Break | *** Mpa | ASTM D 882 | MD |
Break | *** Mpa | ASTM D 882 | TD |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD |
Break | *** % | ASTM D 882 | TD |
Piercing strength | *** N | Internal | |
Elmondorf Tear | *** N/mm | ASTM D 1922 | MD |
Elmondorf Tear | *** N/mm | ASTM D 1922 | TD |
Dart Drop Impact | *** g | ASTM D 1709 | F50 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
