Lumicene mPE M 4040 is a second generation metallocene based Polyethylene with hexene as comonomer.
Lumicene mPE M 4040 can be processed at high output rates with low extrusion pressure, low neck-in, excellent drawability and good gauge control in comparison with conventional LLDPE and first generation metallocene based polyethylene. The high stiffness combined with excellent optical properties brings a significant downgauging potential.
Lumicene mPE M 4040 is a versatile resin that can be used in pure or in blend for the production of both monolayer and multilayer film. Main applications are: specialty film, hygiene film, embossed film, compounds and consumer and automatic packaging, such as produce bags, mailing and hygiene overwrap film.
| Original Document | Technical Datasheet(English) | |||
| Features | Food Contact | |||
| Processing | Cast FilmFilm ExtrusionTube ExtrusionLamination | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | |
Melt Temperature(Tm) | *** °C | ISO 11357 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ISO/DIS 14782 | |
Gloss | *** - | ASTM D 2457 | 45° |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tested Film Thickness | *** μm | Internal | Cast film |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-3 | MD |
Break | *** Mpa | ISO 527-3 | MD |
Break | *** Mpa | ISO 527-3 | TD |
Break | *** Mpa | ISO 527-3 | TD |
Tensile Elongation | |||
Break | *** % | ISO 527-3 | MD |
Break | *** % | ISO 527-3 | TD |
Elmondorf Tear | *** N/mm | ISO 6383-2 | MD |
Elmondorf Tear | *** N/mm | ISO 6383-2 | TD |
Dart Drop Impact | *** g | ISO 7765-1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
