Polypropylene PPH 9099 is a polypropylene homopolymer with a Melt Flow Index of 27 g/10 min.
Polypropylene PPH 9099 is designed with a narrow molecular weight distribution and is intended for the extrusion of fine filaments in spunlaid nonwoven technologies (such as spunbond). It is characterised by excellent spinning properties and provides nonwovens with good mechanical properties and gas fading resistance.
| Original Document | Technical Datasheet(English) | |||
| Features | Anti gas-fadingFood ContactHomopolymer | |||
| Additive | Anti-gas Fading | |||
| Processing | Spinning/Monofilament | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
Bulk(Apparent ) Density | *** g/cm³ | ISO 1183 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | |
Tensile Elongation | |||
Yield | *** % | ISO 527-2 | |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ISO 2039-2 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | 120°C per hour |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | 120°C per hour |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 10N-50°C per hour |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 50N-50°C per hour |
Melt Temperature(Tm) | ***~*** °C | ISO 3146 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
