Lumicene® Polypropylene M9675 is an isotactic propylene copolymer produced via TotalEnergies proprietary metallocene catalyst technology.
Heat Sealable: M9675 produces films with excellent heat seal performance and outstanding optical properties.
Recommended Applications: M9675 is an excellent material for use as a heat sealable layer in production of coextruded biaxially oriented films due to its good processing, excellent optics, very low extractables, low seal initiation temperature and exceptional hot tack seal strength properties.
Processing: M9675 is a narrower molecular weight distribution product than conventional propylene copolymers. M9675 processes well on film extrusion equipment with typical melt temperatures of 425-525°F (218-274°C).
| Original Document | Technical Datasheet(English) | |||
| Features | Good optical propertiesGood Heat SealLow Extractables | |||
| Processing | BOPP | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | DSC | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | |
Gloss | *** % | ASTM D 2457 | 45° |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** psi | ASTM D 882 | |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | |
Secant Modulus | *** psi | ASTM D 882 | 1% Secant Modulus |
Seal Initiation Temperature | *** ℃ | ASTM F88 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
