ViviOn™ Cyclic Block Copolymers (CBCs) is a new class of polymers made by fully hydrogenating block copolymers of styrene and conjugated diene.
The grade ViviOn™ 0510EUT contains the unique features below:
-Can be processed with injection molding, extrusion molding, and injection stretch blow molding.
-ViviOn™ 0510EUT is specially designed for applications that require higher UV transmittance in the UV-C range (200 – 280nm).
The design of ViviOn™ 0510EUT is a special grade for applications that require relatively higher toughness.
| Original Document | Technical Datasheet(English) | |||
| Features | Good ToughnessGood optical properties | |||
| Processing | Injection Stretch Blow MoldingInjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
Water Absorption | *** % | ASTM D570 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
Tensile Elongation | |||
- | *** % | ASTM D 638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
- | *** kJ/m² | ASTM D6110 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | 2°C/min |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | 1kg, 50 °C/ hr |
Glass Transition Temperature | *** °C | Internal | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | ASTM D1003 | 380nm – 760nm |
Haze | *** % | ASTM D1003 | |
Refractive Index | *** - | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
