Flame-protected, thermoplastic elastomer based on ether-polyurethane for injection moulding and extrusion applications
| Original Document | Technical Datasheet(German) | |||
| Features | Flame Retardant | |||
| Additive | Flame Retardant | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | DIN 53504 | Parallel, 200 mm/min |
Tensile Elongation | |||
Break | *** % | DIN 53504 | Parallel, 200 mm/min |
Tear Strength | *** N/mm | ISO 34 | Parallel |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 7619-1 | |
Shore D hardness | *** D | ISO 7619-1 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
V-0 | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
