COSMOPLENE FC9413P is Polypropylene Random Copolymer specially designed for good transparency, low heat seal, higher stiffness and good adhesion with BOPP film.
APPLICATIONS:
Extrusion coating on BOPP film for the packaging of snack food, instant noodle, candy and many others food packing which require clarity.
FC9413P complies with U.S. FDA Regulation 21 CFR 177.1520 (C) 3.1a, as long as it is used unmodified and processed according to standard manufacturing practices in the industries.
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityGood AdhesionGood Heat SealFood Contact | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | Extrusion Coating | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Apparent Bending Modulus | *** Mpa | ASTM D747 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
