COSMOPLENE AX161 is a impact PP copolymer manufactured by the latest gas phase process licensed from Sumitomo Chemical C0 Japan it exhibits good impact and stiffness balance at high melt flow rate.
COSMOPLENE AX161 also shows excellent flowability and good surface appearance of parts after molding.
APPLICATIONS:
COSMOPLENE AX161 is suitable for injection molding of thin wall containers housewares etc.
COSMOPLENE AX161 is suitable for iniection molding of thin wall containers housewares etc.
AX161 complies With US FDA Regulation 21 CFR 177 1520 (C) 3.1a, as long as it is used unmodified and processed according to standard manufacturing practices in the industries.
| Original Document | Technical Datasheet(English) | |||
| Features | Good StiffnessGood Impact ResistanceGood SurfaceHigh Flow | |||
| Processing | Injection | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ASTM D1238 | |
Mold Shrinkage | |||
Flow | *** % | Internal | 2.00 mm |
Across Flow | *** % | Internal | 2.00 mm |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | |
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
-20℃ (-4℉) | *** J/m | ASTM D256 | |
23℃ (73℉) | *** J/m | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
