COSMOPLENE FL7541 is Polypropylene Copolymer with higher Aluminium bonding strength, good apperance, good process stability and lower die deposit.
APPLICATIONS:
COSMOPLENE FL7541 is designed for Aluminium metalized layer of cast film (M-CPP) application. FL7541 contains anti-blocking agent only.
FL7541 complies with U.S. FDA Regulation 21 CFR 177.1520 (C) 3.1a, as long as it is used unmodified and processed according to standard manufacturing practices in the industries.
| Original Document | Technical Datasheet(English) | |||
| Features | Good SurfaceEasy processingMetal PlatingGood AdhesionLow Die Deposit/Plate outCopolymer | |||
| Additive | Antiblock | |||
| Processing | Cast Film | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
- | *** % | ASTM D 638 | |
Apparent Bending Modulus | *** Mpa | ASTM D747 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | |
Gloss | *** % | ASTM D 2457 | |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Young's Modulus | *** Mpa | Internal | MD |
Young's Modulus | *** Mpa | Internal | TD |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
