COSMOPLENE FL7015E2 is Polypropylene Homopolymer designed for cast film with good flow compatibility when coextruded with selected Copolymer/Terpolymer as skin layer.
| Original Document | Technical Datasheet(English) | |||
| Features | Good FlowHomopolymer | |||
| Additive | Slip agent | |||
| Processing | Cast Film | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
- | *** % | ASTM D 638 | |
Apparent Bending Modulus | *** Mpa | ASTM D747 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 30 µm |
Gloss | *** % | ASTM D 2457 | 30 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Young's Modulus | *** Mpa | Internal | MD, 30 µm |
Young's Modulus | *** Mpa | Internal | TD, 30 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
