COSMOPLENE FL7540L is Polypropylene Terpolymer product with good Aluminum adhesiveness, good process stability and high gloss.
APPLICATIONS
COSMOPLENE FL7540L is designed for Aluminum metalized cast film (M-CPP) application. FL7540L contains antiblocking agent only.
| Original Document | Technical Datasheet(English) | |||
| Features | High GlossEasy processingMetal PlatingGood Adhesion | |||
| Additive | Antiblock | |||
| Processing | Cast Film | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
- | *** % | ASTM D 638 | |
Apparent Bending Modulus | *** Mpa | ASTM D747 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 30 µm |
Gloss | *** % | ASTM D 2457 | 30 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Seal Initiation Temperature | *** ℃ | Internal | 30 µm |
Young's Modulus | *** Mpa | Internal | MD, 30 µm |
Young's Modulus | *** Mpa | Internal | TD, 30 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
