COSMOPLENE FL632L is Polypropylene Terpolymer product designed for cast PP with low heat seal temperature, high transparency and roll mark free at high speed.
APPLICATIONS
COSMOPLENE FL7632L is suitable for heat sealing layer for dry lamination with BOPP film. FL7632L contains slip and anti-blocking agents.
| Original Document | Technical Datasheet(English) | |||
| Features | Light TransmissionEasy processingGood Heat Seal | |||
| Additive | Slip agentAntiblock | |||
| Processing | Cast FilmBOPP | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
- | *** % | ASTM D 638 | |
Apparent Bending Modulus | *** Mpa | ASTM D747 | |
Coefficient of Friction | *** - | ASTM 1894 | vs. Itself - Static |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 30 µm |
Gloss | *** % | ASTM D 2457 | 30 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Seal Initiation Temperature | *** ℃ | Internal | 30 µm |
Young's Modulus | *** Mpa | Internal | MD, 30 µm |
Young's Modulus | *** Mpa | Internal | TD, 30 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
