COSMOTHENE EVA KA-31 is produced by the latest autoclave process technology licensed by Sumitomo Chemical Co. Japan.
COSMOTHENE EVA KA-31 is a high strength EVA grade with good adhesioin strength and provides soft feeling for sheet application.
| Original Document | Technical Datasheet(English) | |||
| Processing | ExtrusionSheet Extrusion | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ASTM D1238 | |
Vinyl Acetate | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
- | *** % | ASTM D 638 | |
Apparent Bending Modulus | *** Mpa | ASTM D747 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | JIS K7216 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | |
Ring and Ball Softening Point | *** °C | ASTM E28 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
