Description
LI941-V has superior weatherability compared to general ASA
Key Features
High Heat Resistance, Non Painting, High Weatherability
Application
Bumper,Exterior ETC,Outside Mirror,Spoiler
| Original Document | Technical Datasheet(English)-ISO Technical Datasheet(English)-ASTM | |||
| Features | Heat ResistancePaint-freeWeather Resistance | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23℃ |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23℃ |
Melt Mass Flow Rate(MFR) | |||
220℃/10 kg | *** g/10 min | ISO 1133 | |
220℃/10 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | ASTM D955 | 23℃, 3.2mm |
- | ***~*** % | ISO 294-4 | 23℃, 3.2mm |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 3.2mm, 50mm/min |
Yield | *** Mpa | ISO 527 | 50mm/min, 4mm |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 3.2mm, 50mm/min |
Break | *** % | ISO 527 | 50mm/min, 4mm |
Flexural Modulus | *** Mpa | ASTM D790 | 6.4mm, 15mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 2mm/min, 4mm |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 6.4mm, 15mm/min |
- | *** Mpa | ISO 178 | 2mm/min, 4mm |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | 4mm |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 3.2mm |
23℃ (73℉) | *** J/m | ASTM D256 | 6.4mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
Rockwell R | *** R | ISO 2039-2 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | 4mm, Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | 6.4mm,Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | 4mm, Unannealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | 50N, 50℃/h |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 50N, 50℃/h |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
