Flame Retardant (PBDE Free) - 75 Shore A
| Original Document | Technical Datasheet(English) | |||
| Features | Flame RetardantNon-decaPBBPBBE | |||
| Additive | Flame Retardant | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | Die C,3.2mm, 500 mm/min |
at 100% strain | *** Mpa | ASTM D 412 | Die C,3.2mm, 500 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | Die C,3.2mm, 500 mm/min |
Tear Strength | *** N/mm | ASTM D 624 | Die C |
Compression Set | *** % | ASTM D 395 | 22h@23°C, Method B,Type2 |
Compression Set | *** % | ASTM D 395 | 22h@70°C, Method B,Type2 |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 10 s delay |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | ASTM D 150 | Dry |
Dissipation Factor | |||
1MHz | *** E-4 | ASTM D150 | Dry |
Dielectric Strength | *** kV/mm | ASTM D149 | S/T, in oil |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
