RTP 2700 S-80A MD NATURAL has been tested and was found to be compliant with ISO 10993 sections 5, 10, and 11.
| Original Document | Technical Datasheet(English) | |||
| Features | Medical Application/Health Care | |||
| Processing | Injection | |||
| Compliance | ISO10993 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
- | ***~*** % | ASTM D955 | 3.2 mm |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D 412 | Die C,3.2mm, 500 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | Die C,3.2mm, 500 mm/min |
Tear Strength | *** N/mm | ASTM D 624 | Die C |
Compression Set | *** % | ASTM D 395 | 22h@23°C, Method B,Type2 |
Compression Set | *** % | ASTM D 395 | 22h@70°C, Method B,Type2 |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 10 s delay |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
