PLEXIGLAS® NTX-15 is an amorphous thermoplastic molding compound (PMMA).
In addition to the typical properties of PLEXIGLAS® molding compounds like:
• high mechanical strength, surface hardness and abrasion resistance
• very good weather resistance
• very good polishable
PLEXIGLAS® NTX-15 do have the following features:
• increased wipe resistance
• significantly increased flowing properties
• increased demoulding
• less tendency to create weld lines
PLEXIGLAS NTX-15 is available in coloured state only.
Application:
PLEXIGLAS® NTX-15 is particularly suitable for injection molding of technical components. Owing to ist superior brilliance, high-gloss (Class A) black surfaces can be obtained without an expensive painting process. Due to the improved flowing properties NTX-15 is suitable for sandwich molding of e.g. B-pillar covers or decorative trim parts for automotive interior.
| Original Document | Technical Datasheet(English) | |||
| Features | High GlossAnti-ScratchPaint-freeMold ReleaseWeather Resistance | |||
| Appearance | Colors Available | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Melt Volume Flow Rate(MVR) | |||
230℃/3.8 kg | *** cm³/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | 1 mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | 50 mm/min |
Tensile Elongation | |||
Nominal Tensile Strain at Break | *** % | ISO 527 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | B / 50 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
