PLEXIGLAS® Heatresist hw55 clear is a copolymer based on methyl methacrylate (MMA) with comonomer constituents.
Besides showing the familiar properties of standard PLEXIGLAS® molding compound, such as
• high light transmission,
• good flowability,
• high mechanical strength, surface hardness and abrasion resistance, as well as
• excellent weatherability,
PLEXIGLAS® Heatresist hw55 clear offers the additional benefits of
• increased heat deflection temperature under load and
• improved resistance to stress cacking
• optimised inherent color,
• AMECA listing.
Application:
PLEXIGLAS® Heatresist hw55 clear is particularly suitable for injection molding of technical items.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceLight TransmissionAnti-ScratchWeather Resistance | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | Injection | |||
| Compliance | AMECA | |||
| Diagrams | Viscosity-shear rateShearstress-shear rateDynamic Shear modulus (G storage)-temperatureStress-strain (isochronous)(Creep) 23°CSecant modulus-strainSpecific volume-temperature (pvT)Tensile modulus-temperatureSpec. enthalpy/mass-temp. (DSC)(Tm = 122 °C) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Volume Flow Rate(MVR) | |||
230℃/3.8 kg | *** cm³/10 min | ISO 1133 | |
Water Absorption | *** % | ISO 62 | saturation, 23°C |
Moisture /Humidity Absorption | *** % | ISO 62 | 23°C / 50% |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | 1 mm/min |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | 5 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527 | 5 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/K | ISO 11359 | 0 - 50°C |
Glass Transition Temperature | *** °C | ISO 11357 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | IEC 60695-11-10 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | ISO 13468-2 | 3 mm, D65 |
Refractive Index | *** - | ISO 489 | 3 mm, 589nm/23°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
