Kraton DX405 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 24% mass. It is supplied from Japan in the physical form identified below.
DX405 JOP - supplied as dusted dense pellets.
Kraton DX405 J is used in formulating adhesives, sealants and coatings and as a modifier of polymers. It is also used in compounds for technical applications.
| Original Document | Technical Datasheet(English) | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 2781 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | ***~*** g/10min | ISO 1133 | |
Total Volatiles | *** % | Internal | |
Filled/Ash | *** % | ISO 247 | |
Styrene Content | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 37 | |
at 300% strain | *** Mpa | ISO 37 | |
Tensile Elongation | |||
Break | *** % | ISO 37 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 30s |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
