EMI/RFI Shielding - Stainless Steel Fiber 20%
| Original Document | Technical Datasheet(English) | |||
| Features | Electrically ConductiveEMI/RFI ESDEMI/RFI ShieldingFilled & Reinforced | |||
| Processing | Injection | |||
| Reinforced | 20% Stainless Steel | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
- | ***~*** % | ASTM D955 | 3.2 mm |
Filled/Ash | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
Tensile Elongation | |||
- | ***~*** % | ASTM D 638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | 3.2 mm |
Izod Unnotched Impact Strengh | |||
- | *** J/m | ASTM D 4812 | 3.2 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | |
Thermal Conductivity | *** W/(m K) | ASTM E 1530 | Through-plane |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | Ohm-cm | ASTM D257 | |
Surface Resistivity | *** Ohm | ASTM D257 | |
Surface Resistivity | *** Ohm | EOS/ESD S11.11 | |
Static Decay | *** seconds | FTMS- 101C | MIL-PRF-81705D, 5kV to 50 V, 12% RH |
Shielding Effectivness | *** dB | ASTM D 4935 | 2mm,1000 MHz |
Shielding Effectivness | *** dB | ASTM D 4935 | 2mm,1300 MHz |
Shielding Effectivness | *** dB | ASTM D 4935 | 2mm,1500 MHz |
Shielding Effectivness | *** dB | ASTM D 4935 | 2mm,300 MHz |
Shielding Effectivness | *** dB | ASTM D 4935 | 2mm,500 MHz |
Shielding Effectivness | *** dB | ASTM D 4935 | 2mm,700 MHz |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
