SURGICAL DRAPES
APPLICATIONS
- Medical Film
- Medical Device
- Protective Cover
PROCESSING MODE
- Extrusion Blowing
- Extrusion Casting
· Passed lSO 10993-5 and GB/TI6886 Test
· Environmental friendly and recyclability
· Soft touch
· Good skid resistance
· Excellent elasticity
· Good air permeability
· Good heat sealing performance
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Slip resistance/High FrictionGood Heat SealMedical Application/Health CareSoft | |||
| Appearance | Pellets/GranulesBlue | |||
| Processing | Cast FilmExtrusionExtrusion Blow Molding | |||
| Compliance | GB/T16886ISO10993 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
180℃/5.0 kg | *** g/10min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
- | *** % | ASTM D 412 | |
Tear Strength | *** MPa | ASTM D 624 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
