A medium hardness, multi-purpose thermoplastic elastomer featuring excellent compression set and high temperature performance. Globalene TPV 4055A NT can be processed by extrusion or molding for applications such as weatherstrip profile, seals, window gaskets and other soft touch articles.
Attributes:
-Globalene TPV 4000 series is a fully cured thermoplastic rubbers containing EPDM.
-It is designed for applications requiring good performance even at elevated temperatures.
-Suitable for injection molding and profile extrusion and conventional thermoplastic processing equipment can be used.
-No pre-drying is required.
Applications:
Globalene TPV has quality sealing property, good chemical and weathering resistance and electrical property that is suitable to replace main stream TPV, thermoset EPDM rubber, Styrene based TPEs, flexible PVC and other TPEs. It is an excellent choice for applications requiring flexibility in the following markets: automotive parts, appliance, business machines, construction, consumer products, and electronics.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceWeather ResistanceChemical Resistance | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23˚C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 37 | 23˚C, 500 mm/min |
at 100% strain | *** Mpa | ISO 37 | 23˚C, 500 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 37 | 23˚C, 500 mm/min |
Tear Strength | *** kN/m | ISO 34 | 23˚C, 500 mm/min |
Compression Set | *** % | ISO 815 | 22 hr @ 70˚C |
Compression Set | *** % | ISO 815 | 70 hr @ 125˚C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ISO 812 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 868 | Injection Molded, 15 sec |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
