Revolve xl400 is a rotational moulding cross-linkable polyethylene grade which combines outstanding performance with all the benefits of a high MFI resin. This grade is especially suitable for demanding applications such as diesel tanks and IBCs due to the superb chemical resistance. It is advisable to consult the MSDS before it is used.
Features & Benefits
-High stiffness and hardness
-Good mouldability
-Excellent impact strength
-TÜV approved
-Superb chemical resistance
Available as
-Black powder
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityGood Impact ResistanceChemical ResistanceCrosslinkable | |||
| Appearance | PowderBlack | |||
| Processing | Rotational Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 10% Igepal |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 100% Igepal |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | 50mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 1.3mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Falling Dart Impact | *** J | ARM | -40°C, 3 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
