Revolve N-332 is a rotational moulding low density polyethylene grade. It has been designed to provide wide processing window, excellent toughness without compromising impact strength and mouldability. The grade is UV8 stabilised and it has outstanding ESCR.
Features & Benefits
-Tough
-Outstanding ESCR
-Good impact strength
-UV8
Available as
-Natural pellets & powder
-Black pellets & powder
-Coloured powder
| Original Document | Technical Datasheet(English) | |||
| Features | Good Impact ResistanceEasy processingUV StabiltiyESCR | |||
| Appearance | Pellets/GranulesPowderColors AvailableNatural ColorBlack | |||
| Processing | Rotational Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ISO 1133 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 10% Igepal |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 100% Igepal |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | 50mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 1.3mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Falling Dart Impact | *** J | ARM | -40 °C, 3 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
