Revolve N-324 is a linear medium density rotomoulding resin designed especially for the production of larger items, such as tanks. The material combines good flow characteristics with high level of stiffness with an excellent impact strength.
Features & Benefits
* High stiffness and hardness
* Good mouldability
* Excellent impact strength
* Fully UV stabilized
Available as
* Natural powder
* Black powder
* Coloured granules and powder
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityGood Impact ResistanceEasy processingUV Stabiltiy | |||
| Appearance | Pellets/GranulesPowderColors AvailableNatural ColorBlack | |||
| Processing | Rotational Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ISO 1133 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 10% Igepal |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 100% Igepal |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | 50mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 1.3mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Falling Dart Impact | *** J | ARM | 3 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
