Explore XP9003 is a rotomouldable Polycarbonate powder. It’s low viscosity make it an ideal grade for applications where good aestetic properties are more important than impact strength. This material will conform to the UL94 V-2 fame retardancy test, is very rigid and very hard, and is available in clear or coloured forms.
Features & Benefits
-Flame retardent
-Extreme stiffness and hardness
-Low viscosity for easier processing
-UV stabilised
Available As
-Clear powder
-Coloured powder
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityFlame RetardantEasy processingUV StabiltiyLow viscosity | |||
| Additive | UV-Stabilizer | |||
| Appearance | PowderColors AvailableClear/Transparent | |||
| Processing | Rotational Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
300℃/1.2 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | 50mm/min |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Falling Dart Impact | *** J | ARM | -40°C, 3 mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | Internal | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
