PRE-ELEC® PS 1331 is a carbon black filled conductive polystyrene compound with elevated chemical resistance. In addition to a low electrical resistivity PRE-ELEC® PS 1331 has excellent mechanical properties and is easy to extrude.
PRE-ELEC® PS 1331 is suitable for sheet applications in which the requirement for chemical resistance exceeds the normal polystyrene.
| Original Document | Technical Datasheet(English) | |||
| Features | Electrically ConductiveChemical Resistance | |||
| Processing | Extrusion | |||
| Reinforced | Carbon black | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
200 ℃/5 Kg | *** g/10 min | ISO 1133 | |
200℃/21.6 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
- | ***~*** % | ISO 294-4 | 4.0 mm |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | Across Flow, 400µm |
Yield | *** Mpa | ISO 527 | Flow, 400µm |
- | *** Mpa | ISO 527 | Across Flow, 400µm |
- | *** Mpa | ISO 527 | Flow, 400µm |
Tensile Elongation | |||
Yield | *** % | ISO 527 | Across Flow, 400µm |
Yield | *** % | ISO 527 | Flow, 400µm |
Break | *** % | ISO 527 | Across Flow, 400µm |
Break | *** % | ISO 527 | Flow, 400µm |
Flexural Modulus | *** Mpa | ISO 178 | 4.0 mm |
Ross Flex | *** Cycles | ISO 5626 | Across Flow, 400µm |
Ross Flex | *** Cycles | ISO 5626 | Flow, 400µm |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179 | 4.0 mm |
23℃ (73℉) | *** kJ/m² | ISO 179 | 4.0 mm |
Charpy Unnotched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179 | 4.0 mm |
23℃ (73℉) | *** kJ/m² | ISO 179 | 4.0 mm |
Izod Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 180 | 4.0 mm |
23℃ (73℉) | *** kJ/m² | ISO 180 | 4.0 mm |
Izod Unnotched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 180 | 4.0 mm |
23℃ (73℉) | *** kJ/m² | ISO 180 | 4.0 mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | 4.0 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75/Bf | 4.0 mm |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A50 | 4.0 mm |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | Internal | 400µm |
Surface Resistivity | *** Ohm | IEC 61340-2-3 | 400µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
