PRE-ELEC® PP 1380 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a very low electrical resistivity, PRE-ELEC® PP 1380 has an excellent balance of mechanical properties and it is easy to process.
Typical applications include injection moulded parts for the automotive, medical and electronics industries where a very low volume resistivity is needed.
| Original Document | Technical Datasheet(English) | |||
| Features | Electrically ConductiveAnti-Static | |||
| Processing | Injection | |||
| Reinforced | Carbon black | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/5 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
- | ***~*** % | ISO 294-4 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527 | |
Tensile Elongation | |||
Break | *** % | ISO 527 | |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179 | 4.0 mm |
23℃ (73℉) | *** kJ/m² | ISO 179 | 4.0 mm |
Charpy Unnotched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179 | 4.0 mm |
23℃ (73℉) | *** kJ/m² | ISO 179 | 4.0 mm |
Izod Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 180 | 4.0 mm |
23℃ (73℉) | *** kJ/m² | ISO 180 | 4.0 mm |
Izod Unnotched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 180 | 4.0 mm |
23℃ (73℉) | *** kJ/m² | ISO 180 | 4.0 mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 868 | |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75/Bf | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75/Af | |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A50 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | Internal | |
Surface Resistivity | *** Ohm | IEC 61340-2-3 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
