PRE-ELEC® TPU 1512 is a conductive thermoplastic elastomer compound based on a polyester thermoplastic polyurethane (TPU). Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity, it has retained the excellent mechanical properties of the base elastomer. The grade is suitable for extrusion and injection moulding applications.
| Original Document | Technical Datasheet(English) PRE-ELEC Grade Selection | |||
| Features | Electrically Conductive | |||
| Processing | InjectionExtrusion | |||
| Reinforced | Carbon black | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/10 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
- | ***~*** % | ISO 294-4 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | extruded tape; Thickness 600-800 µm |
Tensile Strength | |||
- | *** Mpa | ISO 527 | extruded tape; Thickness 600-800 µm |
at 100% strain | *** Mpa | ISO 527 | extruded tape; Thickness 600-800 µm |
at 200% strain | *** Mpa | ISO 527 | extruded tape; Thickness 600-800 µm |
at 300% strain | *** Mpa | ISO 527 | extruded tape; Thickness 600-800 µm |
Tensile Elongation | |||
Break | *** % | ISO 527 | extruded tape; Thickness 600-800 µm |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179 | |
23℃ (73℉) | *** kJ/m² | ISO 179 | |
Charpy Unnotched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179 | |
23℃ (73℉) | *** kJ/m² | ISO 179 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 868 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | Internal | extruded tape; Thickness 600-800 µm |
Surface Resistivity | *** Ohm | IEC 61340-2-3 | extruded tape; Thickness 600-800 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
