DESCRIPTION
Daplen EF119AEC is an elastomer modified 13% mineral filled polypropylene compound for injection molding. It shows excellent mechanical properties, and gives a good surface quality.
APPLICATIONS
Daplen EF119AEC is designed for automotive exterior parts requiring light weight applications
-Low Density Bumpers
-Other automotive exterior lightweight applications
SPECIAL FEATURES
Low Density with good mechanical performance
| Original Document | Technical Datasheet(English) | |||
| Features | Toughened/Impact ModifiedGood SurfaceLow DensityFilled & Reinforced | |||
| Processing | Injection | |||
| Reinforced | 13% MineralElastomer | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | 50mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 2mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
