Benefits and Limits
- Already with low filler content extremely high wear resistance behaviour
- Low abrasion of the counterpart surface when using soft metals (i.e. hardened aluminum)
- Particularly low wear when lubricated with water
Applications
- Seals for power steering box (hydraulics)
- Sealing rings and guiding rings in high pressure piston for compressors
| Original Document | Technical Datasheet(English) | |||
| Features | Wear/Abrasion ResistanceLow Friction/WearFilled & Reinforced | |||
| Reinforced | 10% Carbon Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D4894 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | Diametric Shrinkage |
Filled/Ash | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D4894 | CD or ED |
Tensile Elongation | |||
- | *** % | ASTM D4894 | CD or ED |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | ***~*** D | Internal | NEEDLE |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
