Benefits and Limits
- Good heat conductivity
- Wear characteristics approx. 5X better than Virgin PTFE
- Lower coefficient of friction compared to Glass Fibers, Carbon and Bronze compounds
- Low abrasion when used against soft metals counterparts
- Low hardness compared to standard compounds such as Glass Fibers, Carbon and Bronze
Applications
- Suitable usage against aggressive and corrosive agents
- Hot water and steam applications
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceThermal ConductiveWear/Abrasion ResistanceLow Friction/WearSteam ResistantFilled & Reinforced | |||
| Reinforced | 15% Graphite | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D4894 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | Diametric Shrinkage |
Filled/Ash | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D4894 | CD or ED |
Tensile Elongation | |||
- | *** % | ASTM D4894 | CD or ED |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | ***~*** D | Internal | NEEDLE |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
