Base Polymer
Polycarbonate
Filler/Additive System
special filler, UV stabilised
Special Features
translucent, light scattering, high light diffusion
Market Segment
Automotive, Lighting
Application Area
lighting, light transparent components
Typical Applications
lamp covers, display elements, operating elements
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Light DiffusionLight TransmissionUV Stabiltiy | |||
| Additive | UV-Stabilizer | |||
| Appearance | Pellets/Granulestranslucent | |||
| Processing | Injection | |||
| Reinforced | Filler | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Volume Flow Rate(MVR) | |||
300°C/1.2 kg | *** cm³/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | |
Tensile Elongation | |||
Yield | *** % | ISO 527 | |
Break | *** % | ISO 527 | |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
3.5% strain | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-40℃ (-40℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | |||
-40℃ (-40℉) | *** kJ/m² | ISO 179/1eU | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | |
Processing Temperature | ***~*** °C | - | |
Mould temperature | ***~*** °C | - | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
V-2 | *** mm | UL94 | |
Glow Wire Flammability Index(GWFI) | |||
1mm | *** °C | IEC 60695-2-12 | |
2mm | *** °C | IEC 60695-2-12 | |
FMVSS | *** pass | DIN 75200 | 1.0 mm |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | ISO 13468 | T(Y) (d=1mm, A, 2°) |
Light Transmission | *** % | ISO 13468 | T(Y) (d=2mm, A, 2°)) |
Light Transmission | *** % | ISO 13468 | T(Y) (d=3mm, A, 2°) |
Haze | *** % | ISO 13468 | T(Y) (d=1mm, A, 2°) |
Haze | *** % | ISO 13468 | T(Y) (d=2mm, A, 2°)) |
Haze | *** % | ISO 13468 | T(Y) (d=3mm, A, 2°) |
Half power angle | *** - | Internal | T(Y) (d=1mm, A, 2°) |
Half power angle | *** - | Internal | T(Y) (d=2mm, A, 2°)) |
Half power angle | *** - | Internal | T(Y) (d=3mm, A, 2°) |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
